2-22 System Utilities
Removing BIOS Passwords 0
The User and Supervisor passwords can be cleared by shorting the RTC_RST point with a
metal instrument. (Figure 2-26)
Figure 2-26. CMOS Jumper
Cleaning BIOS Passwords 0
To clean the User or Supervisor passwords, perform the following steps:
1. At the DOS prompt, enter clnpwd.exe.
2. Press 1 or 2 to clean the desired password shown on the screen.
Figure 2-27. Clean BIOS Password
3. The on screen message shows function success or failure.
SG_JV51_HR.book Page 22 Friday, July 8, 2011 5:58 PM
To Next Page
Loading...
