3-62 Machine Maintenance Procedures
WLAN and 3G Antenna Removal 0
Prerequisite:
LCD Panel Removal
3G is not available in this model.
1. Release foil tabs (A) covering left WLAN and 3G antennas (B). (Figure 3-68)
Figure 3-68. LCD Module Cover without Panel
WLAN antenna cables not shown in image.
2. Remove left WLAN and 3G antennas (B) from cable guides.
SG_JV51_HR.book Page 62 Friday, July 8, 2011 5:58 PM