Machine Maintenance Procedures 3-43
Speaker Module Installation 0
1. Install speaker modules on lower cover (Figure 3-45).
2. Connect cable (D) to mainboard connector (E) (Figure 3-46).
3. Connect cable (F) to mainboard connector (G).
4. Install and secure four (4) screws (C) to lower cover.
5. Install upper cover.
ID Size Quantity Screw Type
C M2.0x3.0 4
SG_JV51_HR.book Page 43 Friday, July 8, 2011 5:58 PM
To Next Page
Loading...
