3-8 Machine Maintenance Procedures
Battery Pack Removal 0
1. Place computer on flat surface, battery side up.
2. Push battery lock/unlock latch (B) to unlock position.
3. Remove battery pack (A) from lower cover.
Figure 3-3. Battery Pack
Follow local regulations for battery (A, Figure 3-3) disposal.
Battery Pack Installation 0
1. Move lock/unlock latch (B) into unlock position (Figure 3-3).
2. Install battery (A).
3. Move lock/unlock latch (B) into lock position.
SG_JV51_HR.book Page 8 Friday, July 8, 2011 5:58 PM
To Next Page
Loading...
