3-50 Machine Maintenance Procedures
CPU Removal 0
Prerequisite:
Thermal Module Removal
1. Locate module (A) on mainboard (Figure 3-53).
Figure 3-53. CPU in Socket
2. Turn captive screw (B) left 180º to release module.
3. Remove module from socket.
CPU Installation 0
1. Align CPU marker (C) with socket marker (D) and install CPU in socket (Figure 3-53).
2. Turn screw (B) right 180º to secure module.
3. Install thermal module.
SG_JV51_HR.book Page 50 Friday, July 8, 2011 5:58 PM
To Next Page
Loading...
