Acer Aspire 5755 - Camera Module Removal; Camera Module Installation

Machine Maintenance Procedures 3-57
Camera Module Removal 0
Prerequisite:
LCD Bezel Removal
1. Locate camera module (A) on LCD module cover (Figure 3-62).
Figure 3-62. LCD Module Overview without Bezel
2. Remove module cable (G) from module connector (F) as shown in Figure 3-63.
Figure 3-63. CCD Module Removal
3. Remove module (H) from adhesive strip on LCD cover.
Camera Module Installation 0
1. Install and secure module (H) to LCD module cover (Figure 3-63).
2. Install module cable (G) to module connector (F).
3. Install LCD Bezel.
A
C
C
B
D
E
F
G
H
SG_JV51_HR.book Page 57 Friday, July 8, 2011 5:58 PM