2-26 System Utilities
Using the LAN MAC EEPROM Utility 0
1. Extract and copy the contents of LAN MAC Tools.zip to a bootable USB HDD device.
2. Use a text editor to edit MACADDR.TXT with the correct MAC address.
3. Insert USB HDD and boot device.
4. Enter LAN MAC Tools folder.
5. At DOS prompt, enter JV51.BAT to write MAC values to EEPROM.
6. Reboot computer when process has completed.
SG_JV51_HR.book Page 26 Friday, July 8, 2011 5:58 PM
To Next Page
Loading...
