3-44 Machine Maintenance Procedures
Mainboard Removal 0
Prerequisite:
Speaker Module Removal
WLAN Module Removal
1. Remove two (2) screws (A) from lower cover (Figure 3-47).
Figure 3-47. Mainboard Screws & WLAN Antennas
2. Remove adhesive tape (B) securing WLAN antennas to mainboard.
3. Remove WLAN antennas from mainboard.
SG_JV51_HR.book Page 44 Friday, July 8, 2011 5:58 PM
To Next Page
Loading...
