ACO CDNP7ACC - INS-DM Module: Accessibility Features; 5 N, 6 N, 17 N Modules: Display Windows

11
only in zone 1 and supports 6 cards or key fobs for each apartment and 6
administrator’s cards or key fobs: 1530 in total. Refer to the “Extended user
instruction for the CDNP5, CDNP6 (CDNP6ACC) digital door entry system” for
detailed description of this operation of the reader.
3. The INS-DM module (only the INSPIRO+ series) is intended for persons with
disabilities; it features a T-loop, light and audible signalling (voice messages) of
the unit’s status. The module generates sound, which can be received by persons
with hearing impairment through T-loop, which can be found in almost every
hearing aid. Owing to this function, hearing aid users may use the door entry unit
comfortably, with sound being clear to them, with no external interference or
distortion. This module is marked with the international symbol of hearing loop.
It also features three signalling LEDs to show the unit’s status. The red LED is
used to signalling the call. When the call is answered, the yellow LED comes on.
The green LED comes on when the door is open.
The module also broadcasts three audible messages: “Calling, please wait",
"Door is open, please enter" or “No answer, please try again later”. These
messages can be broadcast in three languages: Polish, English and French. The
language is changed automatically upon change of the language of messages
displayed on the door entry unit.
The module cab be adjusted with potentiometers:
- VOICE VOLUME: volume level of broadcast messages
- T-LOOP POWER: volume level of the sound sent to the hearing aid through T-
loop.
The module is connected to the "EXTMOD2" (top) port of the unit. The module
also features an EXTMOD2 port which can be used to connect other modules in
the unit.
4. Modules 5N, 6N and 17N are backlit windows of different sizes which can be
used to enter address information, calling information, business name tags or list
of names, etc.
Dimensions of 5N module window:
- in CDNP7: width 68 mm, height 40 mm
- in INSPIRO+: width 73 mm, height 39 mm
Dimensions of 6N module window:
- in CDNP7: width 68 mm, height 102 mm
- in INSPIRO+: width 73 mm, height 99.5 mm
Dimensions of 17N module window:
- in CDNP7: width 68 mm, height 160 mm
- in INSPIRO+: width 73 mm, height 166 mm