20 System overview
fabian HFO | SW 5.1.x
Ref: 113003.EN / Date 2020-02-10
Ethernet: N/A (disabled)
Flow Sensor: Maximum load is one Flow sensor
(Only ACUTRONIC Medical Systems Flow sensors can be connected)
Max. Voltage: 5 V
Max. operating current: 300 mA per hotwire -> 600 mA total.
SpO2: Max. Voltage: 3.3 V
Max. operating current: 200 mA
etCO
2
: Max. Voltage: 5V
Max. operating current: 700mA
To Next Page
Loading...
