ACUTRONIC fabian HFO User Manual

66 Configurations menu
fabian HFO | SW 5.1.x
Ref: 113003.EN / Date 2020-02-10
#
Parameter
Description
10.
Ratio of I-time
I-time Display Configuration. Setting I time or frequency (Frequency
- I-time / I-time / E-time).
11.
Ppsv Parameter
Select Ppsv parameter to be absolute value or above PEEP
Parameter.
12.
Use BTB for Vt
Select if Tidal Volume measurement should be updated for every
breath.
13.
Hospital Settings
optional: The “Hospital Settings” button is only active if it is enabled
in service mode.
Resets the device to the hospital defaults.
14.
Factory Defaults
optional: The “factory defaults” button is only active if it is enabled in
service mode.
Resets the device to the factory defaults.
WARNING:
Only reset to hospital and factory settings when the device is NOT connected to patients.

ACUTRONIC fabian HFO Specifications

General

Brand	ACUTRONIC
Model	fabian HFO
Category	Medical Equipment
Language	English