ACUTRONIC fabian - Page 54

7 Alarms 48
fabian Therapy evolution | SW V5.1.x
Ref: 121003.EN / Date: 26Jan2021
Accessing the Alarm Limits menu by pressing the Alarm Limits button:
The Alarm Limits menu allows all
alarm limits to manually or
automatically be adjusted.
In the event of an alarm, a notice
will appear in the Information bar
and a Red crossed out bell symbol
indicates the alarm cause.
Also, an audible alarm will sound
which may be silenced for 2
minutes by pressing the Alarm
Silence button.
The Alarm Limit can be manually
adjusted (1).
The Alarm Limits menu
automatically focuses on the
corresponding parameter.
The limit can also be
automatically adjusted by
pressing the button underneath
Autoset (2).
After the alarm limit has been adjusted or there are no more active alarms, the bell symbol
will turn Grey.
The visual alarm message must be reset by pressing the Alarm Silence
button.
1
2