Adaptec Storage Manager - Starting Adaptec Storage Manager on Linux; Starting Adaptec Storage Manager on Netware

Step 2: Starting Adaptec Storage Manager ● 32
Starting Adaptec Storage Manager on Linux
1 Type the following command to change to the Adaptec Storage
Manager installation directory:
cd /usr/StorMan
2 Type the following command and press Enter:
sh StorMan.sh
3 When the Log In dialog box appears (see page 31), enter the user
name and password that you use to log on to your system, then click
Connect.
Note: Each user name has a permission level associated with it. See
Understanding Permission Levels on page 35 for more information.
Starting Adaptec Storage Manager on
NetWare
To start Adaptec Storage Manager on the NetWare operating system,
type the
LOAD RAIDMAN command.