Step 2: Starting Adaptec Storage Manager ● 34
Starting the Agent on Linux
On systems running Linux, the Adaptec Storage Manager agent starts
automatically when the system is powered on.
To verify that the agent is running:
1 Open a shell window.
2 Enter this command: ps -ef | grep StorAgnt.sh
3 If the agent is running, it’s listed as sh StorAgnt.sh.
4 Manage and monitor the system by logging into it as a remote
system (see page 61).
The Adaptec Storage Manager agent’s default settings are suitable for
most storage spaces. To customize the settings for your specific
requirements, see page 67.
Starting the Agent on NetWare
To start the agent:
1 From the NetWare console, type: LOAD RaidAgnt
2 Press Enter.
3 Manage and monitor the system by logging into it as a remote
system (see page 61).
The Adaptec Storage Manager agent’s default settings are suitable for
most storage spaces. To customize the settings for your specific
requirements, see page 67.
To Next Page
Loading...
