ADCMT 6243 User Manual

6243/44 DC Voltage Current Source/Monitor Operation Manual
A.3 Execution Time
A-5
A.3 Execution Time
A.3.1 GPIB Remote Execution Time (Nominal Values)
Computer: Fujitsu FMV-6266T6, Windows 95
GPIB hardware: AT-GPIB/TNT (PnP) manufactured by NATIONAL INSTRUMENTS
Used module: Niglobal.bas, Vbib-32.bas (supplied with AT-GPIB/TNT (PnP))
Applied language: Visual Basic 5
(1) Program code execution time
Time from the program code reception to the time when the next program code reception becomes
ready.
Item Program code Condition
Execution
time
Unit: ms
Operate /
Standby
Operate E Source mode: DC or Pulse 120
Source mode: Sweep 310
Standby H 80
Source function VF, IF Source mode:
DC or Pulse
operation, and
Hold mode
With a current
range change
18
V3 to V6, I-1 to I4 Without a current
range change
38
Source range change V3 to V6 12
I-1 to I4 33
Voltage
source /
Voltage
limiter*
Source value
Limiter value
Pulse value
Base value
Bias value
D<data>, DB<data>, SB<data>
Without unit
Operate and
HOLD mode
Without polarity
change
11 to 17
With polarity
change
16 to 22
D<data>unit, DB<data>unit,
SB<data>unit
With unit
Without polarity
change
13 to 21
With polarity
change
17 to 26
With range change 17 to 26

ADCMT 6243 Specifications

General

Brand	ADCMT
Model	6243
Category	Measuring Instruments
Language	English