Additel 761A - Page 52

38
Device version
Read-only parameter
Sensor
Sensor S/N
Read-only parameter
Sensor unit
Read-only parameter
Lower sensor limit
Read-only parameter
Upper sensor limit
Read-only parameter
Minimum sensor
range
Read-only parameter
Device output
Primary
variable/range unit
It can be modified to any unit supported by the transmitter. During
modification, the upper and lower limits are displayed through
conversion.
Pv lower range limit
Not exceed the lower sensor limit.
Pv upper range
limit
Not exceed the upper sensor limit.
Conversion
function
It can be modified to linear or square root.
Damping
Device data filtering time, in the unit of S
Polling address
0 by default, support input of integers from 0 to 15.
Emergency mode
It can be set to Enable/Disable, depending on whether the transmitter
supports it or not.
Emergency
The emergency command value can be set.