aditec MIC 3000 - Entering Numerical Values

User Manual MIC 900 / MIC 1100 / MIC 3000
10
Issue 17.08.2021_00
Numerical pad text entry MIC 3000
Text can also be entered via the operation buttons 0 – 9. Select which value you want to enter via the
cursor buttons and then change into entry mode by pressing the Return button. Now use the operation
buttons on the numerical pad to enter your value and confirm your entry by pressing Return. The
cursor can be moved via the arrow buttons.
Be aware
You can skip between keypad modes by pressing the „Test“ button. While you are
entering text, the LED in the „Test“ button will show the selected keypad mode.
LED off – number
LED lit – lower case letters
LED flashing – capital letters
If you want to delete a symbol, take the cursor to the position you want to delete and overwrite it with
a blank space. Press button „9“ 3 times or button „0“ once and a blank space will appear.
Entering special symbols
Special symbols can be entered via the „0“ button. The following symbols are available:
leer
.
,
!
?
%
/
_
-
+
=
#
*
(
)
1.4 Entering numerical values
A numerical pad is used to enter numerical values. It will be displayed when
you have to enter values.
- Deleting the value in an entry box
- Changing the leading sign of a value
- Closing the keypad. Changes made to the nominal value
are not saved.
- De-activating a nominal value
- Saving an entered value
Numerical pad