User Manual MIC 900 / MIC 1100 / MIC 3000
5.1.5 Operating hours messages on the user pages
When the operating hours counter has overrun (limit value reached or the scheduled time
has passed), the name of the counter will be shown in the status display.
Operating hours display on the status bar
Be aware: Status bar display
Messages from the operating hours counter have the lowest priority and are only
shown on the status bar when no other status messages are active (even messages
without text!)
Before the start of a program an additional window is shown with the counter information
(see figure 24 left). If the counter has the configured option "Reset = PIN", the PIN number
has to be entered.
To Next Page
Loading...
