User Manual MIC 900 / MIC 1100 / MIC 3000
The number of programs and steps can be individually pre-set by the service technician
(Service / number of programs , steps)
4.5 Create/change cleaning times in programming mode
Cleaning options are available for certain processes.
To set a cleaning option in the program steps, it must be configured and activated by a service
technician.
If the cleaning option is activated in a process, a "Cleaning sequence" field is displayed in the
programme step.
When the "Cleaning" field is clicked, the cleaning times of the individual sections / lines are displayed
and can be changed.
By pressing the number "1", a different cleaning sequence can be set.
If automatic step time calculation is activated1 for the cleaning processes, no time can be
entered in the step.
4.6 Setting up a program with VisuNet
VisuNet is a visualisation program for programming, automatic controlling, monitoring, logging,
backing-up, telecontrolling/telemonitoring of installations and processes.
For automatic step time calculation, the step time is the sum of all section times activated in the process (plus the overlap
time)
Selection of sequence
Section times:
• Section is activated in current
process (change possible)
• Section is not activated in the
current process (change is not
possible).
Calculated total time of all sections
Leave cleaning mask
To Next Page
Loading...
