User Manual MIC 900 / MIC 1100 / MIC 3000
Operating hours counter with interval times
Operating hours counter without interval times
Operating hours counter with function start
lock and manual reset
Operating hours counter with function start lock
and manual reset with PIN
Operating hours – Message before the start of a program
6 Operating mode
The controller is in operation, this means a program is running.
Once a program has been started the button „Stop“ on the task bar will be highlighted in red. On the
info bar the scrolling text „Installation in operation“ will be shown.
Operating mode
If administrators have been nominated for the controller, you will be asked for a
password before a program start. Only operators who are authorised to start a program
can do so.
To Next Page
Loading...
