User Manual MIC 900 / MIC 1100 / MIC 3000
▪ Documentation
Various information can be stored (e.g. operating instructions, company address, email addresses)
▪ Information:
Display of the information about the controller version and settings.
▪ Start page:
Back to the start page/standby
4 Programming mode
If you are asked to enter a PIN number here, the function “Administrators (from V00.07)” , item
8.7, page 42, is enabled. This means that changes can only be made by autorised personnel.
4.1 Selecting a program
There are two options of how to get to the „Program selection“ menu.
1. Starting on the menu display: press the „Programs“ box
2. Starting from standby: press the „Programs“ button in the task bar at the bottom.
Press a program to select it. Use the arrow buttons to navigate within the display. Alternatively, you
can use the cursor button to navigation through the “program selection” list.
Program selection programming mode
Back to the start page/standby
Skipping backwards in the program list by blocks of 9 programs
Skipping to the previous program
Skipping to the next program
Skipping backwards in the program list by blocks of 9 programs
Editing, copying or deleting programs
To Next Page
Loading...
