User Manual MIC 900 / MIC 1100 / MIC 3000
Double click the „Step number“ box and a menu window will open.
This allows you to add, copy or delete steps.
Adding
If you want to add e.g. a new 2. step, the pervious step 2 becomes
step 3 . This means all steps are moved backwards by one position.
Step 20 is deleted.
Copying
Copying a selected step into another program or into another position
within the same program.
Deleting
Deleting a selected step. All subsequent steps move forward by one
position.
A step is automatically copied when you press „Enter“.
The step that originally occupied that position is overwritten!
When you delete or add a step, you may unintentionally cause two program to link or
break up an existing program link! („Linking programs“, item 4.4, page 26)
4.4 Linking programs
You can program several program step in each program.
If the last program step has been pre-programmed and step 1 of the following program is also pre-
programmed, the two programs will automatically be linked. If the last program step is not pre-
programmed, the controller will end the program with the last pre-programmed step.
To Next Page
Loading...
