aditec MIC 3000 - Fast Dehumidifying; Information Page; Profiles

User Manual MIC 900 / MIC 1100 / MIC 3000
36
Issue 17.08.2021_00
6.10 Fast dehumidifying
The activation of the fast dehumidifying function is indicated by the symbols shown below.
Hint
If the temperature is within the fast-dehumidifying range and the dehumidifying aggregate is
switched on, then "On" in the button is shown in red. This means the fast dehumidifying
function is active.
Operating mode: fast dehumidifying not active
Operating mode: fast dehumidifying active:
Heating and dehumidifying switched on
7 Information page
On the info page the following information is shown: which type of device you have got, the software
version, device number, IP number with port, MAC address, VisuNet if enabled and the system
temperature.
Information
8 Profiles
Under „Profiles“ all the functions are shown in the selected system language.