Program and steps can also be added, copied or deleted on the „Edit” page. You can get to
the relevant sub-menu by pressing on the „Program“ or „Step“ box, respectively.
See „Copying, deleting and adding programs/steps“, item4.3.6, page 25
Edit: By touching the "Edit" box, a series of images will be displayed for selection. Select the desired
program image and confirm with "Enter".
Delete: Touching the "Delete" box will remove the program image for the selected program. The
program picture is still available when you select it again.
Exit: By touching the "Exit" field, the programme picture selection is closed.
4.3.2.1 Program group
One of 12 groups can be assigned to a programme.
The currently selected programme group is displayed in blue Select a new program proup or change a
existing program group and confirm your selection with Enter.
If no program group image is found in the controller, only the programme group is displayed.
To Next Page
Loading...
