User Manual MIC 900 / MIC 1100 / MIC 3000
If you enter „99“ as the number of repetitions, it means endless repetitions.
If the controller1 is in operation and the repeat sequence of the step currently being processed
is changed2, the change is only effective after this repeat sequence has ended.
4.3.6 Copying, deleting and adding programs/steps
Select the program you want to copy.
Change to the „Program selection“ display.
Press the “Edit” box on the task bar. A selection window will
open. Press „Copy“.
You can copy the selected program into another program.
Enter the relevant program number and confirm with „Enter“.
A program is automatically copied when you press „Enter“.
The program that originally occupied that position is overwritten!
Possible from version V00.18.
Changes can be made on the controller or by sending the current program from VisuNet or from the service program
Please enter which step(s) should be repeated and how
often. Confirm with „Enter“.
Example 1:
If you want steps 3 to 5 to be repeated twice , you enter:
from step : 3
to step : 5
repetitions : 2
Example 2:
If you want steps 3 to 5 to be repeated 4 times , you enter:
from step : 3
to step : 5
repetitions : 4
Setting up repetitive steps
To Next Page
Loading...
