User Manual MIC 900 / MIC 1100 / MIC 3000
8.7 Administrators (from V00.07)
Up to 50 users (administrators) can be registered with the controller. They are authorised to operate
the controller. The following settings are available for each user:
▪ Name: maximum length 10 characters
▪ PIN: 4 digit number
A user needs his/her PIN to log on with the controller.
PIN stipulations
- PIN = 0000 means that the user is disabled.
- Every user has to have his/her own individual PIN. No identical PINs allowed.
Overview of the tasks you can execute when you have access rights
▪ Start / Stop / Pause / Batch no.
- Starting and stopping programs,
- Entering and changing a batch number,
▪ Manual pausing and/or resuming of a running program
▪ Changes to the nominal values / Switching into another step
- Transient changes to the nominal values during operation
- Manual switching into another step during operation
▪ Setting up /changing programs
Setting up and changing programs in programming mode (permanent change to the programs)
Security of the administrator settings
The administrator settings are password-protected
Passwords for displaying or changing the administrator settings
▪ Password 6800 :
All users and their access rights are shown. Changes to the settings are not possible.
▪ Password 7890:
All users and their access rights are shown. Changes to the settings are possible, subject
to the following conditions:
User PIN: Changes can only be made if a valid user PIN1 is entered
User name, access rights, global administrator settings: Changes can only be made when a
valid administrator password has been entered.
8.7.1 Configuration/changes to the administrator settings
Administrator settings: Password 7890 is required
Call up page: Menu/ Profiles/ Administrators / Password “7890”
Changes to the user PIN „0000“ are always possible.
To Next Page
Loading...
