aditec MIC 3000 - Date and Time; Enabling Data Logger

User Manual MIC 900 / MIC 1100 / MIC 3000
37
Issue 17.08.2021_00
8.1 Date and time
If you want to make changes to the date and/or time, press the relevant box and use the on-screen
keypad to enter the new date or time. Confirm with „Enter“ on the numerical pad.
In order to apply this change, also press the „Enter“ button on the task bar. The amended time will
now appear on the info bar.
Setting date and time
Please note
The current date and Central European Time are pre-set.
8.2 Enabling data logger
Enabling data logger
The controller can send current program data during operation to data logger (SD card – File SD
card\\ProgLog).
1
2