22
Network Settings
The Link controller’s Wi-Fi settings can be changed here. The controller creates its
own local network so that you can connect your IPad wirelessly. If the IPad is
connected over USB, it will bypass any Wi-Fi connection.
Important Note: any changes made to the network settings will require the Link
controller to be reset before they will take effect.
Network Name: You can enter a new name for the network using up to 32
alpha-numeric characters.
Network Password: The password must be 8-32 alpha-numeric characters.
Wi-Fi Band: You can choose between using the 5GHz band (recommended) or
the 2.4GHz band. 5GHz is usually less crowded but 2.4GHz typically has more
range and is better going through walls.
To Next Page
Loading...