5
Overview
This manual describes all of the features of the Airstream Link app. You may want
to consider downloading this manual into your IPad for easy reference while using
the app.
Airstream Link is a lighting control app designed to work alongside the ADJ Link
controller. The app and controller work together to make a complete lighting
control system that’s ideal for small to medium sized venues such as nightclubs,
churches, trade shows or anywhere intelligent lighting fixtures might be used.
Both the app and console work together to control fixtures. The app can run by
itself but DMX512 output can only come from the Link controller’s four DMX512
connectors. The four 5-pin DMX connectors on the back of the Link console allow
you to connect to any DMX512 lighting fixture from any manufacturer. Each
connector is a separate DMX512 universe giving the system control of up to a
total of 2048 DMX512 channels. The Link controller also provides a private dual
band 2.4GHz or 5GHz Wi-Fi network to connect to your IPad wirelessly as well as
a USB connector if you prefer a hardwired connection.
Lighting changes, effects, fades, etc. all come from the IPad and are sent to the
Link controller either over Wi-Fi or USB. If connected using Wi-Fi the operator can
use the IPad remotely and can move around the room as long as the IPad is in
range of the Link controller’s wireless network.
There is a slot on the top of the Link console to hold an IPad in landscape
orientation. The viewing angle of the IPad can be adjusted by adjusting the angle
of the slot. (Remove the IPad when adjusting the slot angle).
What’s New
Version 1.1
Add home position feature for moving fixtures.
Add manual “Go” and “Back” for shows.
Add fixtures to library.
Utilize the page and matrix buttons when saving scenes, effects and shows.
Add “clear” function by pressing in wheels.
Add press-in functions to small rotaries.
To Next Page
Loading...