67
each step you add. Use the clear button to remove the contents of the current
step or the entire chase. One tap clears the step and the next tap will clear all of
the steps. Tap the record or the play buttons to end recording. While recording,
monitor the lower right display to keep track of how many steps there are and
which step you are editing.
The loop/bounce and forward/reverse buttons work the same as with the other
effects editors. They will control the direction of the chase. They have no effect on
the waveforms.
This editor can have both waveforms and a chase running at the same time. Try
not to include waveform channels in the chase steps as the wave will take
precedence. A useful tip is to make a one-step chase to force some channels to
go to fixed values and hold them while other channels are running waves. For
example, set the shutter and dimmer channels open or color wheel on a fixed
color while using a wave to pulse the iris channel.
Link Controller
The faders, wheels and buttons on the Link controller can be used with this editor.
Buttons 1-7 (top row of matrix) will duplicate the bottom row of buttons on the
screen. Faders 1-3 and wheels 1-3 will control the speed, fade and phase. Note
that the faders on the Link do not control the channel faders in the editor. Those
must be set using the screen.
To Next Page
Loading...