52
There are six preset color effects available plus the ability to record your own
color chases.
The large color picker control in the center is used for selecting RGB colors when
recording color chases and also for confining the range of some of the hue based
effects. There are tabs in the lower corners of the picker for adjusting the hue
range. To the right of the picker are faders for amber, white and UV that can be
used when recording color chases. To the right of those are speed, fade and
phase faders used to control the behavior of the effect.
Setting the Hue Range
Drag the small tabs in the lower corners of the color picker to confine the hue to a
smaller range as shown below. The tabs will only be visible for effects that are
hue based.
To Next Page
Loading...