ADT NVR4200 Series User Manual

Hybrid Standalone NVR User Guide 4 Web Service
Figure 4-83
To add a user:
1. Click the Add User button. The Add User dialog appears.
2. Enter the User Name, which can be a maximum of 6 characters, including alpha-numeric
characters and the underline.
3. Enter and confirm the user Password, which must be 1 – 6 numeric characters only.
4. Use the drop-down list to select a Group for this user.
5. In the Authority field, check the boxes for the rights you want assigned for this user.
6. Enter the MAC and an optional Memo for the User.
7. Click Save.
Note:
• The user rights must not exceed the group rights.
• As a general rule, the general user should have lower rights than the administrator.
NVR4200 Series User Guide
196

ADT NVR4200 Series Specifications

General

Brand	ADT
Model	NVR4200 Series
Category	Network Hardware
Language	English