ADTECH9 Series CNC Maintenance Manual
- 116 -
Unit : None
Authority : Operation admin or higher
Default : Speed2
Effective time : Instant
Note : In pretreatment mode, set to Angle to use corner speed balancing
algorithm, or set to Speed to use axis acceleration constraints balancing
algorithm, or set to Speed1 to use efficient and quick acceleration
constraints balancing algorithm.
019 G Code pre-treatment processing mode
Range : 0~1
Unit : None
Authority : Operation admin or higher
Default : 0 (real-time processing)
Effective time : Instant
Note : Real-time processing is suitable for machine test.
In pretreatment mode, the system enters processing state buffs for two
seconds and pre-reads. The pretreatment mode only can check the
direction and size of feeding segment to adjust the speed automatically
and process at optimized speed.
020 'O’ Pro Scan
Range : 0~1
Unit : None
Authority : Operation admin or higher
Default : 1
Effective time : Instant
Note : File scanning symbol will quicken the file transfer speed when
processing large files.
When transferring NC files, the system needs to scan over to position
every program block. X In this way, if the file only has one block and
the file size is very big, it will cause unnecessary waiting time. If this
option is closed, the system will exit after scanning the address of first
block.
021 Variable frequency analog control mode
To Next Page
Loading...
Need help?
General
