6TADLP742-1E
TOTAL ACCESS 3000/3010
DLP-742
Page 13 of 14
Total Access
®
3000/3010 System Manual © 2003, ADTRAN, Inc.
Perform Steps Below in the Order Listed
6. From the System Controller Menu select option 2, Common B – [OC-3MX], and
press <Enter>.
7. From the Protect MUX Menu select option 2, Provisioning, and press <Enter>.
8. From the Provisioning Menu select option 1, Service State, and press <Enter>.
9. From the Service State Menu select option 2, Out-of-Service, Maintenance.
10. Return to the Protect MUX Provisioning menu by pressing <Esc>.
The Protect MUX in slot B should now be provisioned with the identical settings
as the Primary MUX in slot A.
1.9.1 Follow-up Procedure
This completes the procedure for provisioning the Total Access 3000 OC-3
Multiplexer Module. Proceed to NTP-506 to place the units In-Service. If this
procedure was called out from another document, return to that document and
continue.
To Next Page
Loading...
