Advanced Instruments OsmoTECH User Manual

Chapter 3 Configuring settings
29
OsmoTECH® Single-Sample Micro-Osmometer User Guide
3.8 Establishing control limits
You can establish control limits to use with your
instrument.
1. Press CONTROLS and log in (see Logging in from
the Settings screen).
2. Press ADD.
Figure 1:
3. Enter the ID or scan it in with the barcode scanner.
4. Press next to the Lot Number field to enter the
lot number manually.
5. Press next to the Expiration Date field and select
the expiration date.
NOTE: Expiration dates on Advanced Instruments
controls include the month and year. The
system requires the day. Use the last day of
the month as the expiration day.
6. Enter the nominal value and standard deviation
range.
The system populates the nominal value and the
standard deviation range for Advanced Instruments
controls.
7. Press SAVE.
Editing a control
1. From the Controls screen, press a control to select it.
2. Press EDIT.
3. Edit the settings for the selected control and press
SAVE (refer to Establishing control limits).
Deleting a control
1. From the Controls screen, press a control to select it.
2. Press DELETE.
Displaying a Control Monitoring chart
Your instrument can generate Control Monitoring charts
for controls with standard deviation (SD) bands.
1. From the CONTROLS screen, select a control and
press CHART.
2. Press EXPORT to export the chart to a USB drive.
3. When you have finished viewing (and/or exporting)
the chart, press Exit to close the chart and return to
the Controls screen.

Advanced Instruments OsmoTECH Specifications

General

Brand	Advanced Instruments
Model	OsmoTECH
Category	Medical Equipment
Language	English