Reasonably foreseeable misuse
Page 156 of 178 DLT-V83 Series Manual V1.31 Advantech-DLoG
16. Reasonably foreseeable misuse
16.1. General
− Observe the permissible environmental conditions
− Observe correct voltage ranges.
16.2. Mobile application on vehicles
− Ensure that supply lines are fused correctly.
− Read the labeling on the cable and connect the power supply cable with the correct
polarity.
− Cut the power supply cable as short as possible. This avoids tangled cables and
improves the quality of the power supply.
− Observe the vehicle manufacturer’s instructions for connecting additional loads, for
instance, in conjunction with an emergency shut-off switch.
− Be sure that the connection of the line is as directly as possible to the battery and
not to power supply lines with a great deal of interference (e.g. the engine power
supply) or otherwise affected by consumers.
− Connect the power supply cable to a suitable place. Ensure that the connecting
cable has an adequate cross section and ampacity at the connection point.
16.3. Stationary use with AC power supply unit
− Please observe that the switch of the Advantech-DLoG power supply cable must be
set to On in order to be able to start the DLT-V83.
To Next Page
Loading...
