Configuration
Page 66 of 178 DLT-V83 Series Manual V1.31 Advantech-DLoG
6.8. Configuring screen blanking (optional)
An optional screen blanking function is available for the DLT-V83, which darkens the
screen.
Possible application area for screen darkening: The screen of the DLT-V83 can be
switched dark automatically when the vehicle is driving.
Observe the installation instructions for the screen blanking option
Please observe the installation instructions supplied with the screen blanking option.
6.9. Protecting the display from the memory effect
The display of the DLT-V83 has to be protected from the burning in of a motionless
image. An image that has remained motionless for too long can cause irreversible
damage to the display.
In the power management center of the utilized operating system, you must specify
that the display of the DLT-V83 should be turned off when no user input occurs.
A motionless image can stay on the display for a maximum of 12 hours. After more than
12 hours there is the risk of the memory effect.
6.10. (Re)calibrating the touchscreen
The touchscreens of all DLT-V83 devices are already precalibrated and therefore do
not have to be calibrated when first put into operation.
Software recalibration under Windows 7 Pro, Windows 8.1 Industry and WE8S
These Microsoft Windows versions offer the option of software recalibration for the
touchscreen (Control Panel -> Tablet PC Settings).
This resets the sensitivity of the touchscreen to an operating system default setting,
which can result in poorer detection of taps on the screen.
You can use Reset to reset the software recalibration.
To Next Page
Loading...
