AERMEC MULTI CONTROL User Manual

24
GB
4598010_00
User manual - Date time MENU PROCEDURES
The fi rst window of the DATE TIME MENU allows the user to
set the time of the system; this window displays the following
information:
- Current time set in the system (
1
): indicates the time set
for the system; all the timers of the MULTI CONTROL panel
will be managed by using the time set in this parameter.
From this window it is possible to:
(1) Set system time: pressing the key
C
will allow you to enter
modifi cation mode and the TIME will be highlighted; at this point,
the procedure for setting the system time will be:
a) Press the key
A
to increase the hour or the key
B
to decrease
it.
b) Press the key
C
to confi rm the selection and pass on to set
the minutes.
c) Press the key
A
to increase the selected value or the key
B
to decrease it.
d) Press the key
C
to confi rm the selection and pass on to set
the seconds.
c) Press the key
A
to increase the selected value or the key
B
to decrease it.
d) Press the key
C
to confi rm the selection and exit time
modifi cation mode.
(2) Pass on to the next window:
to go to the next window of this menu, press the key
B
.
(3) Exit this window:
press the key
A
to return to the selection of the USER menus.
(4) Exit this window:
press the key
D
to return to the selection of the main menus.
• Setting the time of the system:
A
B
C
ESC
D
System clock
08:26:15
System clock
08:26:15
1

AERMEC MULTI CONTROL Specifications

General

Brand	AERMEC
Model	MULTI CONTROL
Category	Control Panel
Language	English