AERMEC MULTI CONTROL User Manual

58
GB
4598010_00
The fi fth window of the PLANT SETUP allows the user to set
the delay time for switching the units on and off; this window
displays the following information:
- Delay time in switching units on (
1
): indicates the time
which must pass between the system requesting power and
the actual enabling of the units involved.
- Delay time in switching units off (
2
): indicates the time
which must pass between the system reaching the requested
power and the units actually switching off.
From this window it is possible to:
(1) Set an ON/OFF delay: pressing the key
C
will allow you to
enter the modifi cation mode and the switch-on delay time will be
highlighted (
1
); by pressing the keys
A
or
B
it will be possible
to modify the value currently displayed, while pressing the key
C
will confi rm this choice, automatically shifting the cursor to
the switch-off delay (
2
); by pressing the keys
A
or
B
it will be
possible to modify the value currently displayed, while pressing
the key
C
will confi rm this choice.
(2) Pass on to the next window:
to go to the next window of this menu, press the key
B
.
(3) Go back to the previous window:
to go back to the previous window of this menu, press the
key
A
.
(4) Exit this window:
press the key
D
to return to the selection of the USER menus.
• Setting ON/OFF delay (Password 101 or 303):
A
B
C
ESC
D
ON/OFF delay
1
OFF -> ON 001 s
ON -> OFF 005 s
ON/OFF delay
OFF -> ON 001 s
ON -> OFF 005 s
2

AERMEC MULTI CONTROL Specifications

General

Brand	AERMEC
Model	MULTI CONTROL
Category	Control Panel
Language	English