AERMEC MULTI CONTROL User Manual

25
4598010_00
GB
The second window of the DATE TIME MENU allows the
user to set the date of the system; this window displays the
following information:
- Current date set in the system (
1
): indicates the date set
for the system; all the timers of the MULTI CONTROL panel
will be managed by using the date set in this parameter.
From this window it is possible to:
(1) Set system date: pressing the key
C
will allow you to enter
modifi cation mode and the DAY will be highlighted; at this point,
the procedure for setting the system date will be:
a) Press the key
A
to increase the day or the key
B
to decrease
it.
b) Press the key
C
to confi rm the selection and pass on to set
the month.
c) Press the key
A
to increase the selected value or the key
B
to decrease it.
d) Press the key
C
to confi rm the selection and pass on to set
the year.
e) Press the key
A
to increase the selected value or the key
B
to decrease it.
f) Press the key
C
to confi rm the selection and pass on to set the
day of the week.
g) Press the key
A
to increase the selected value or the key
B
to decrease it.
h) Press the key
C
to confi rm the selection and exit date
modifi cation mode.
(2) Go back to the previous window:
to go back to the previous window of this menu, press the
key
A
.
(3) Exit this window:
press the key
D
to return to the selection of the main menus.
• Setting the date of the system:
A
B
C
ESC
D
1
System date
13/03/11
Monday
System date
13/03/11
Monday
2

AERMEC MULTI CONTROL Specifications

General

Brand	AERMEC
Model	MULTI CONTROL
Category	Control Panel
Language	English