Agilent Technologies 1260 Infinity G1315D User Manual

202 Agilent 1260 Infinity DAD and MWD User Manual
9 Maintenance
Replacing the CompactFlash Card (G1315C/G1365C only)
Replacing the CompactFlash Card (G1315C/G1365C only)
1 Remove the CompactFlash card by pulling it out of its slot in the rear of the
detector.
2 Install the new CompactFlash card into the slot.
3 Turn the detector ON.
Figure 63 Replacing CompactFlash card
When If defective
Tools required None
Parts required # p/n Description
1 01100-68700 CompactFlash Card Kit
Preparations Turn the detector OFF and have access to the rear of the detector.
NOTE
The G1315C and G1365C is equipped with a CompactFlash card. This CompactFlash card is
required for the operation of the detector (data buffering). DO NOT use other types of
CompactFlash cards. Only CompactFlash cards supplied with the detector or as
replacement with above part number are tested with the detector.

Agilent Technologies 1260 Infinity G1315D Specifications

General

Brand	Agilent Technologies
Model	1260 Infinity G1315D
Category	Laboratory Equipment
Language	English