Agilent 1260 Infinity DAD and MWD User Manual 203
Maintenance
9
Replacing the Module’s Firmware
Replacing the Module’s Firmware
To upgrade/downgrade the module’s firmware carry out the following
steps:
1 Download the required module firmware, the latest LAN/RS-232 FW
Update Tool and the documentation from the Agilent web.
• http://www.chem.agilent.com/_layouts/agilent/downloadFirmware.aspx?
whid=69761
2 For loading the firmware into the module follow the instructions in the
documentation.
When The installation of newer firmware might be necessary
• if a newer version solves problems of older versions or
• to keep all systems on the same (validated) revision.
The installation of older firmware might be necessary
• to keep all systems on the same (validated) revision or
• if a new module with newer firmware is added to a system or
• if third party control software requires a special version.
Tools required Description
LAN/RS-232 Firmware Update Tool
OR Agilent Lab Advisor software
OR Instant Pilot G4208A
(only if supported by module)
Parts required # Description
1 Firmware, tools and documentation from Agilent web site
Preparations Read update documentation provided with the Firmware Update Tool.
To Next Page
Loading...
Need help?
General
