Agilent Technologies 1260 Infinity G1315D User Manual

61
Agilent 1260 Infinity DAD and MWD User Manual
Agilent Technologies
4
Using the Detector
Leak and Waste Handling 62
Setting up an Analysis 63
Before Using the System 63
Requirements and Conditions 65
Optimization of the System 67
Preparing the HPLC System 68
Running the Sample and Verifying the Results 77
Special Settings of the Detector 78
Control Settings 78
Configuration Settings 79
Online Spectra (DAD only) 80
Run Recovery Settings 81
Automated Run Recovery in case of temporary communication
failures 82
Manual Run Recovery in case of permanent communication
failures 84
Analog Output Settings 85
Spectrum Settings (DAD only) 86
Peakwidth Settings 88
Slit Settings 90
Margin for Negative Absorbance Settings 91
Optimizing the Detector 91
Special Setups with Multiple DAD-MWDs 92
Two detectors of same type (e.g. G1315C/D and G1315C/D) 92
Two detectors of similar type (e.g. G1315C/D and G1315A/B) 92
Solvent Information 93
This chapter provides information on how to set up the detector for an analysis
and explains the basic settings.

Agilent Technologies 1260 Infinity G1315D Specifications

General

Brand	Agilent Technologies
Model	1260 Infinity G1315D
Category	Laboratory Equipment
Language	English