Agilent Technologies 6890 Plus User Manual

341 Micro-cell Electron Capture Detector (µ-ECD)
Replacement procedures
8 of 26
Jun 2001
Detectors
Agilent 6890 Gas Chromatograph Service Manual
Figure 341-7 Removing the heater/sensor
4. Remove the two screws holding the upper heated block onto the assembly.
Carefully lift the block over the anode lead and remove.
5. Slide the heater and sensor out of the lower heated block.
Heater blocks
Heater/sensor assembly

Agilent Technologies 6890 Plus Specifications

General

Brand	Agilent Technologies
Model	6890 Plus
Category	Laboratory Equipment
Language	English