Agilent Technologies 6890 Plus User Manual

19 of 26
Jun 2001
Detectors
Agilent 6890 Gas Chromatograph Service Manual
Micro-cell Electron Capture Detector (µ-ECD) 341
Replacement procedures
Figure 341-15 Removing the top cover and anode signal wire
4. Remove the screw and clamp on the electrical interconnect.
5. Remove one Torx T-20 screw from each end of the signal board. (Do not
remove the screw on the top of the cover.)
Remove detector
top cover
Remove anode signal wire

Agilent Technologies 6890 Plus Specifications

General

Brand	Agilent Technologies
Model	6890 Plus
Category	Laboratory Equipment
Language	English