210 Split/Splitless Inlet
Replacement procedures
14 of 30
Jun 2001
Inlets
Agilent 6890 Gas Chromatograph Service Manual
Figure 210-9 Replacement split vent filter trap kit, part no. G1544-60610
WARNING Turn off the oven and turn off the heater of the inlet you are replacing and
let them cool down. Turn off all detector f lows. Turn off the carrier gas supply
pressure, then turn off the main power switch and unplug the power cord.
1. Disconnect the spit vent trap line from the inlet assembly.
Split vent back weldment
Replacement filter kit
Split vent front
weldment
Filter cartridge
O-rings (2)
To Next Page
Loading...
Need help?
General
