Agilent Technologies 8720E Series

Chapter 4 4-5
Reading Analyzer Data
Marker Data
Table 4-1 Units as a Function of Display Format
Display
Format
Marker
Mode
OUTPMARK OUTPFORM
Marker Readout
1
1. The marker readout values are the marker values displayed in the upper right-hand corner of the display.
They also correspond to the value and auxiliary value associated with the fixed marker.
Value 1 Value 2 Value 1 Value 2 Value Aux
Value
LOG MAG dB
N/S
2
2. Value 2 is not significant in this format, though it is included in data transfers. See also “Fast Data
Transfer Commands” on page 5-5.
dB
N/S
2
dB N/S
PHASE degrees
N/S
2
degrees
N/S
2
degrees N/S
DELAY seconds
N/S
2
seconds
N/S
2
seconds N/S
SMITH
CHART
LIN MKR lin mag degrees real imag lin mag degrees
LOG MKR dB degrees real imag dB degrees
Re/Im real imag real imag real imag
R + jX real
ohms
imag
ohms
real imag real
ohms
imag
ohms
G + jB real
Siemens
imag
Siemens
real imag real
Siemens
imag
Siemens
POLAR LIN MKR lin mag degrees real imag lin mag degrees
LOG MKR dB degrees real imag dB degrees
Re/Im real imag real imag real imag
LIN MAG lin mag
N/S
2
lin mag
N/S
2
lin mag N/S
SWR SWR
N/S
2
SWR
N/S
2
SWR N/S
REAL real
N/S
2
real
N/S
2
real N/S
IMAGINARY imag
N/S
2
imag
N/S
2
imag N/S