Agilent Technologies 8720E Series User Manual

4-51
Printing, Plotting, and Saving Measurement Results
Re-Saving an Instrument State
Re-Saving an Instrument State
If you re-save a file, the analyzer overwrites the existing file contents.
NOTE You cannot re-save a file that contains data only. You must create a new file.
1. Press and select the storage device.
❏
❏
❏ (If necessary, refer to the external disk setup procedure in
"Saving an Instrument State" on page 4-38.)
2. Press and then use the or key or the front-panel knob to
highlight the name of the file that you want to re-save.
3. Press .
Save/Recall
SELECT DISK
INTERNAL MEMORY
INTERNAL DISK
EXTERNAL DISK
RETURN
RE-SAVE STATE
YES

Agilent Technologies 8720E Series Specifications

General

Brand	Agilent Technologies
Model	8720E Series
Category	Measuring Instruments
Language	English