6-2
Calibrating for Increased Measurement Accuracy
How to Use This Chapter
How to Use This Chapter
This chapter is divided into the following subjects:
• "Calibration Considerations" on page 6-4
• "Procedures for Error Correcting Your Measurements" on page 6-10
— frequency response error correction
— frequency response and isolation error correction
— enhanced frequency response error correction (with enhanced reflection error
correction)
— one-port reflection error correction
— full two-port error correction (ES Analyzers Only)
• "Power Meter Measurement Calibration" on page 6-33
• "Calibrating for Noninsertable Devices" on page 6-40
— adapter removal calibration (ES Analyzers Only)
— matched adapters
— modify the cal kit thru definition
• "Calibrating for Non-Coaxial Devices (ES Analyzers Only)" on page 6-50
— TRL calibration
— LRM calibration
• "Calibrating Using Electronic Calibration (ECal)" on page 6-58
• "Adapter Removal Using ECal (ES Analyzers Only)" on page 6-69
To Next Page
Loading...
Need help?
General
