2-12
Test Result Editor
• Save/Delete
• !Important
• # Valid
• ? Questionable
• Remarks
• OK
The Test Result Editor provides the following GUI to set a flag and remarks to the test result
record. Set the flag and remarks to the test record.
•Save button and Delete button
Divides test records into groups, Save and Delete.
Test records in Save-group are always listed in the lower area of the EasyEXPERT main screen.
Test records in Delete-group can be listed when Results > Filter > Show Deleted Data is checked.
•Flags buttons
The following buttons are available. You can set one of the following flags.
•Important ! Button
Sets the important flag (!) to the test result record.
•Valid # button
Sets the valid flag (#) to the test result record.
•Questionable ? Button
Sets the questionable flag (?) to the test result record.
•Remarks field
You can enter characters into this field. The characters will be recorded as the Remarks value of
the test result record.
•OK button
Applies the setup on the Test Result Editor, and closes this dialog box.
To Next Page
Loading...
